Dash display
Best for: a first lookPrice: free, already in the cab.
Good
- Nothing to buy or plug in
- Some machines show SPN and FMI on screen
Watch out
- How it shows codes differs by model
J1939 codes are two numbers read together: the SPN (Suspect Parameter Number) names the part or signal, and the FMI (Failure Mode Identifier) says how it failed. SPN 3251 FMI 16 is a DPF pressure reading that's too high; FMI 3 or 4 on the same SPN points at the sensor's circuit instead.
No one paid to be listed; links to Mechy carry a tracking tag. Who publishes this.
A J1939 code is read as SPN, then FMI: the SPN says which part or signal, the FMI says how it failed, and the two only mean something together. Most tools also show an occurrence count and the controller that sent it.
A 19-bit number, 0 to 524,287. Numbers from 520,192 up are each maker's own (Vector).
Here: a valid reading, below normal, moderately severe. FMIs 0 to 21 and 31 are in use (FCAR).
How many times the fault has happened: handy for faults that come and go (Simma Software).
Which controller reported it: engine, transmission, brakes (Simma Software).
In Cummins' table, SPN 4364 FMI 18 is SCR catalyst conversion efficiency, valid data below normal, at the moderately severe level: the catalyst isn't cutting enough NOx (Kato Works' copy, read November 16, 2026). Makers word the same code differently, so read yours in your engine maker's table. SPN 157 FMI 18 is fuel rail pressure below normal in Cummins' table and "fuel rail pressure too high" in Daimler's.
The FMI is the second number of a J1939 code, and it says what kind of failure the controller sees: 22 values are in use, 0 to 21 and 31, in FCAR Tech's list read November 16, 2026. The wording below is plain English written for this page, not SAE's text.
| FMI | What it means | Group | Look first at |
|---|---|---|---|
| 0 | A real reading, well above normal (most severe) | Reading | The real level, pressure or temperature |
| 1 | A real reading, well below normal (most severe) | Reading | The real level, pressure or temperature |
| 2 | Signal jumps around, comes and goes, or makes no sense | Signal | Sensor, connector, loose wiring |
| 3 | Voltage too high, or shorted to power | Circuit | Wiring shorted to power, the sensor |
| 4 | Voltage too low, or shorted to ground | Circuit | Wiring shorted to ground, the sensor |
| 5 | Current too low, or an open circuit | Circuit | A broken wire or unplugged connector |
| 6 | Current too high, or a short to ground | Circuit | A short to ground, the part's coil |
| 7 | Told to move and didn't, or out of adjustment | Other | The part that was told to move |
| 8 | Signal frequency or pulse width is off | Signal | Speed or PWM sensor, its wiring |
| 9 | Updates arrive too slowly, or stop | Network | The data link, the sending controller |
| 10 | The value changes too fast | Signal | A sensor or reading that jumps |
| 11 | Fault seen, cause not identified | Other | The maker's troubleshooting steps |
| 12 | A smart part or module has failed | Other | The smart part or module itself |
| 13 | Needs calibration | Other | A calibration or setting |
| 14 | Special case: see the maker's steps | Other | The maker's manual for this exact code |
| 15 | A real reading, a little above normal (least severe) | Reading | The real value; watch it |
| 16 | A real reading, above normal (moderately severe) | Reading | The real value |
| 17 | A real reading, a little below normal (least severe) | Reading | The real value; watch it |
| 18 | A real reading, below normal (moderately severe) | Reading | The real value |
| 19 | Data from the network arrived with errors | Network | The controller that sent the data |
| 20 | The reading has drifted high | Signal | A sensor reading high against others |
| 21 | The reading has drifted low | Signal | A sensor reading low against others |
| 31 | The condition is present | Other | What the SPN names is happening now |
FMI 0, 1 and 15 to 18 come in three severities each, and the controller believes the sensor: FMI 0 on coolant temperature (SPN 110) is "coolant temperature high" in Daimler's table, so the engine may really be hot. FMI 3 to 6 describe the circuit, so the sensor, its connector and its wiring are all suspects, and the code doesn't say which. FMIs 22 to 30 don't appear in the published lists we read.
The most-searched J1939 SPN codes are aftertreatment codes: SPN 3251 and SPN 4364 lead with 720 US searches a month each, and 13 of the 32 most-searched SPNs are DPF, SCR, DEF or NOx sensor codes (searches read November 16, 2026).
| SPN | Part or signal | System | Searches |
|---|---|---|---|
| 3251 | DPF differential pressure | Aftertreatment | 720 |
| 4364 | SCR catalyst conversion efficiency | Aftertreatment | 720 |
| 157 | Fuel rail pressure | Fuel | 590 |
| 639 | J1939 network #1 (the data link) | Network | 590 |
| 3216 | NOx sensor at the SCR intake | Aftertreatment | 590 |
| 3226 | NOx sensor at the SCR outlet | Aftertreatment | 590 |
| 5246 | SCR operator inducement (emissions derate) | Aftertreatment | 590 |
| 111 | Engine coolant level | Cooling | 480 |
| 3058 | EGR system response | Air and EGR | 480 |
| 102 | Intake manifold (boost) pressure | Air and EGR | 390 |
| 1209 | Exhaust gas pressure | Air and EGR | 320 |
| 1569 | Engine protection torque derate | Engine protection | 320 |
The names come from Cummins' and Daimler's code tables as Kato Works publishes them; all 32 SPNs and the CSV are on the common J1939 codes data page, and the emissions ones are explained in aftertreatment codes. The full standard list belongs to SAE, which publishes it as the J1939 Digital Annex; CSS Electronics' file built from it holds more than 10,000 SPNs.
You can read J1939 codes free on many dashboards, with a $240 phone adapter, a $495 handheld reader, or a $759 PC adapter plus maker software such as Cummins INSITE Lite at $1,325 a year (prices read November 16, 2026). Ordered by starting price, then name.
| Option | What it does | Plugs into the truck | Price |
|---|---|---|---|
| Dash display | Shows codes on the truck's own screen, where the maker built that in | Built in | Free |
| Diesel Repair Desktop | Fault-code lookup software from Diesel Laptops | No | $0 |
| Mechy | Repair steps from a code you type, or a photo | No | First 3 guides free; Pro $79/yr or $9.99/mo |
| BlueFire adapter + app | 9-pin Bluetooth adapter; free app reads and resets faults | Yes | $240 |
| FCAR F506 | Handheld reader for J1708, J1939 and OBD-II | Yes | $495 |
| Diesel Handheld 2 | Handheld: codes, live data, supported DPF regens | Yes | $699 |
| Nexiq USB-Link 3 + maker software | PC adapter for INSITE, DiagnosticLink, ServiceMaxx, Cat ET | Yes | $759 + $1,325/yr (INSITE Lite) |
| Dealer or diesel shop | A technician with the maker's software diagnoses it | Yes | Shop rate, by quote |
Price: free, already in the cab.
Price: $0.
Price: first 3 guides free, the first with no sign-up; Pro $79 a year or $9.99 a month.
Price: $240 for the 9-pin adapter; the app is free.
Price: $495.
Price: $699.
Price: $759 for the wired kit; Cummins INSITE Lite $1,325 for 12 months.
Price: the shop's rate; ask for the diagnostic fee first.
When a J1939 code comes up, stop safely, write down every code with both numbers, and read the FMI before buying a part: Noregon, which makes JPRO, says a sensor code isn't always a bad sensor, because wiring, connectors, corrosion and voltage problems set the same faults.
You clear a J1939 code by fixing its cause and then resetting it with a tool or app that clears faults, such as the BlueFire app, the FCAR F506 or the Diesel Handheld 2 (each says so on its maker's page, read November 16, 2026). An emissions code also stays behind as a permanent code that only the engine computer erases, once its own check runs and finds the fault gone (40 CFR 86.010-18).
Under the same rule, the emissions warning lamp may go out after three drive cycles in a row without the fault, and a stored code may be erased after 40 engine warm-ups without it. Disconnecting power to the engine computer doesn't erase a permanent code either.
J1939 is not the same as CAN: it's the heavy-vehicle language that runs on a CAN bus, with 29-bit identifiers at 250 kbit/s, or 500 kbit/s on newer networks (CSS Electronics, read November 16, 2026). Cars report OBD-II codes such as P0300; trucks and machines on J1939 report SPN and FMI.
The usual plug is the round 9-pin Deutsch connector under the dash: black (type 1) on older trucks and green (type 2) from 2013-14, and the green type is backwards compatible. US rules require emissions trouble codes a standard scan tool can read on engines for vehicles over 14,000 lb, and from 2013 a standard connector in the driver's foot-well (40 CFR 86.010-18).
Two guides and the FMI reference, each with its figures dated November 16, 2026.
j1939codes.com is published by Winding AI, Inc., the company that makes Mechy, a repair app that turns a job you describe, a fault code included, into numbered steps. We make money when someone pays for Mechy Pro ($79 a year or $9.99 a month on mechy.si, read November 16, 2026). Nobody paid to be listed, and links to other sellers earn nothing. Winding AI, Inc., 1887 Whitney Mesa Drive #5338, Henderson, NV 89014.
We read every code name in Cummins' and Daimler's tables as Kato Works publishes them, the FMI list in FCAR Tech's and CODESYS's references, SPN ranges in Vector's J1939 introduction, and the network facts in CSS Electronics' guide and 40 CFR 86.010-18, all on November 16, 2026. Every price was read that day on the seller's own page. Searches are DataForSEO's US monthly figures from Google Ads. The full list of sources and the CSV are on the data page.